In past years, Peter Sripol set multiple records for the widest RC Airplane, the most motors on a single airframe, and so many more. This year...
A broken engine lug can be repaired with two 1/32-inch steel plates bolted above and below. Fill the space between the plates with solder or metal-filled...
Heat the knife blade on a Monokote iron, then use the blade to seal down covering in awkward-to-reach places. Adapted from 400 Great R/C Modeling Tips...
As reported by Thehill.com, the United States is opening the throttle in its push to develop and procure hypersonic missiles after falling behind key foreign adversaries...
30 odd yeas ago, as then-editor of Model Airplane News, I joined a remarkable team as a guest photojournalist. The team used two boats, each with...
Landing lights for that scale ship. A micro switch is actuated by the landing gear. Connect the normally closed (N/C) contact. When the gear comes down,...
Flexible “snake drills” are useful in confined places. Slip a length of music wire into a piece of Nyrod inner tubing. Sharpen one end of the...
Servo connectors It’s often a good idea to secure mating servo connectors so they don’t come loose. Heat-shrink tubing works, and some commercial products clip the...
Along with being an outstanding show maneuver, knife-edge flight will help take your flying to a new level of satisfaction and accomplishment. While opinions vary about...
Only one thing gets more instant attention at a flying field or event than a jet, and that is a scale helicopter. They usually attract a...
The Alien is a fresh new concept that was designed by Christophe Bourdon and manufactured by Anton Ovcharenko’s OA Composites, which is based in Kyiv Ukraine....
The 80mm FMS Futura I reviewed in the January 2023 issue turned out to be one of my favorite foam jets in a long time, so...