Make Your Connection Easier
| Have you ever had trouble managing the aileron extension wires on a detachable wing? Keep those wires where they belong and prevent them from falling back into the wing. First, cut a circular piece of 1⁄4-inch foam slightly larger than the hole in the wing for the aileron servo wires. Cut a small slit in the center of the foam, and one at a time, push each connector end through. Glue the foam circle over the hole. Now the servo connectors are easy to use, stay outside of the wing and can be adjusted so that there is no excess wire to wrap around other servos in the fuselage.
Alan Cagan |
Have you ever had trouble managing the aileron extension wires on a detachable wing? Keep those wires where they belong and prevent them from falling back into the wing. First, cut a circular piece of 1⁄4-inch foam slightly larger than the hole in the wing for the aileron servo wires. Cut a small slit in the center of the foam, and one at a time, push each connector end through. Glue the foam circle over...
PARDON THE INTERRUPTION
Purchase Options
All-Access membership
Become an ace with the Model Airplane News ALL-ACCESS MEMBERSHIP! From loops and rolls to crosswind landings, our pro tips will make you the best RC pilot on the flightline. Model Airplane News covers the entire spectrum of RC aircraft, with reviews and how-tos on scale warbirds, 3D aerobats, jets, and more.
You May Also Enjoy Our Monthly Magazine Subscription
